71112 tkim/o3103 tsim ta-100701 no.7488-1/7 http://onsemi.com semiconductor components industries, llc, 2013 august, 2013 50a02mh bipolar transistor ? 50v, ? 0.5a, low v ce ( sat ) pnp single mcph3 stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty. applications ? low-frequency ampli er, high-speed switching small motor drive, muting circuit features ? large current capacity ? low collector-to-emitter saturation voltage (resistance) rce(sat) typ=210m [ic=0.5a, ib=50ma] ? small on-resistance (ron) speci cations absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-base voltage v cbo --50 v collector-to-emitter voltage v ceo --50 v emitter-to-base voltage v ebo -- 5 v collector current i c --500 ma collector current (pulse) i cp --1.0 a collector dissipation p c when mounted on ceramic substrate (600mm 2 0.8mm) 600 mw junction temperature tj 150 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7019a-004 ordering number : en7488a product & package information ? package : mcph3 ? jeita, jedec : sc-70, sot-323 ? minimum packing quantity : 3,000 pcs./reel packing type : tl marking electrical connection 1 : base 2 : emitter 3 : collector mcph3 0.25 0.25 0.07 2.1 1.6 2.0 0.65 0.3 0.85 0.15 12 3 0 to 0.02 tl 50A02MH-TL-E am lot no. lot no. 3 2 1
50a02mh no.7488-2/7 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb = --40v, i e =0a --100 na emitter cutoff current i ebo v eb = --4v, i c =0a --100 na dc current gain h fe v ce = --2v, i c = --10ma 200 500 gain-bandwidth product f t v ce = --10v, i c = --50ma 690 mhz output capacitance cob v cb = --10v, f=1mhz 3.8 pf collector-to-emitter saturation voltage v ce (sat) i c = --100ma, i b = --10ma --60 --120 mv base-to-emitter saturation voltage v be (sat) i c = --100ma, i b = --10ma --0.9 --1.2 v collector-to-base breakdown voltage v (br)cbo i c = --10 a, i e =0a --50 v collector-to-emitter breakdown voltage v (br)ceo i c = --1ma, r be = --50 v emitter-to-base breakdown voltage v (br)ebo i e = --10 a, i c =0a --5 v turn-on time t on see speci ed test circuit. 30 ns storage time t stg 170 ns fall time t f 30 ns switching time test circuit ordering information device package shipping memo 50A02MH-TL-E mcph3 3,000pcs./reel pb free v r r b v cc = --25v v be =5v ++ 50 input outpu t r l 220 f 470 f pw=20 s i b1 d.c. 1% i b2 i c =20i b1 = --20i b2 = --200ma
50a02mh no.7488-3/7 collector-to-emitter voltage, v ce -- mv collector current, i c -- ma base-to-emitter voltage, v be -- v collector current, i c -- ma collector current, i c -- ma dc current gain, h fe 0 0 --100 --50 i c -- v ce it05118 it05119 --200 --150 --300 --250 --500 --450 --400 --350 --200 --600 --400 --800 --1000 --100 --500 --300 --700 --900 0 0 i c -- v be --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --200 --600 --500 --400 --300 --100 i b =0 ta=75 c 25 c - -25 c --200 a --1ma --500 a --2ma --5ma --10ma --15ma --50ma --30ma --20ma --25ma v ce = --2v --40ma it05120 3 100 h fe -- i c --1.0 2 3 5 7 --10 2 3 5 7 2 3 5 7 --100 --1000 2 3 5 1000 7 5 7 ta=75 c 25 c --25 c v ce = --2v it05410 --1.0 23 57 --10 23 57 23 57 --100 --100 2 2 3 5 7 3 --10 ta=75 c --25 c 25 c i c / i b =10 v ce (sat) -- i c collector current, i c -- ma collector-to-emitter saturation voltage, v ce (sat) -- mv collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector current, i c -- ma collector current, i c -- ma collector-to-emitter saturation voltage, v ce (sat) -- mv base-to-emitter saturation voltage, v be (sat) -- v it05122 --1.0 1.0 cob -- v cb --10 2 3 5 7 2 3 5 7 --100 2 3 5 7 10 f=1mhz it05124 v ce (sat) -- i c it05125 v be (sat) -- i c --1.0 23 57 --10 23 57 23 57 --100 --1000 3 --1000 2 3 5 7 2 3 5 7 2 --100 --10 i c / i b =50 ta=75 c -- 2 5 c 25 c 2 --1.0 3 5 7 2 --1.0 23 57 --10 23 57 23 57 --100 --1000 ta= - -25 c 75 c 25 c i c / i b =20 it05123 v ce (sat) -- i c --1.0 23 57 --10 23 57 23 57 --100 --1000 --1000 --100 2 3 5 7 2 3 5 7 --10 7 ta=75 c --25 c 25 c i c / i b =20 collector current, i c -- ma collector-to-emitter saturation voltage, v ce (sat) -- mv
50a02mh no.7488-4/7 0 0 100 200 it05046 300 600 400 500 700 40 20 100 120 60 80 140 160 collector dissipation, p c -- m w ambient temperature, ta -- c p c -- ta mounted on a ceramic board(600mm 2 ? 0.8mm) collector current, i c -- ma gain-bandwidth product, f t -- mhz it05121 --1.0 f t -- i c 2 3 57 2 3 57 2 3 57 --10 --100 --1000 100 1000 5 7 2 3 v ce = --10v f=1mhz --0.1 0.1 base current, i b -- m a ron -- i b on resistance, ron -- it06093 7 5 3 2 10 7 5 3 2 7 5 3 2 1.0 100 3 2 57 3 2 57 --1.0 --10 out in 1k 1k i b
50a02mh no.7488-5/7 embossed taping speci cation 50A02MH-TL-E
50a02mh no.7488-6/7 outline drawing land pattern example 50A02MH-TL-E mass (g) unit 0.007 * for reference mm unit: mm 0.65 0.65 0.4 2.1 0.6
50a02mh ps no.7488-7/7 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner.
|
